SPRING
Pulsarlube S
SERIES
S100 : Ø67mm (2.64") x 129mm (5.08")(H)
The Pulsarlube S Unique and Ingenious Design.
QUICK DOWNLOAD
The Pulsarlube S is an advanced spring type lubricator operates with the spring at the bottom and an upward piston movement, which dramatically reduces the effects of oil separation that have plagued traditional spring type lubricators.
FEATURES
Design
The upward piston movement reduces oil separation and the possibility of grease hardening
Easy to Refill
Easy to refill grease on site using grease nipple
Control Knob
Grease dispensing rate can be easily controlled by using the control knobs
Pre-Filled
Available pre-filled
PRODUCT INFO
CROSS SECTION
SPEC & CERTIFICATIONS
| SPEC | Description |
|---|---|
| Grease Capacity | 100ml (refillable) |
| Operating Method | Spring |
| Operating Pressure | N/A |
| Operating Temperature | -20℃~100℃ (-4°F~212°F) |
| Dispensing Periods | 5 Dial Settings |
| Remote Installation | N/A |
| Multi-Point Installation | N/A |
| Packaging | 10 Units/Case |
| Certification | Description |
|---|---|
| IP Code | N/A |
| Etc. | N/A |
INSTALLATIONS
| Part No. | Description |
|---|---|
| A003 | Reducer, 3/8"F x 1/8"M Adaptor (Steel) |
| A004 | Reducer, 1/4"F x M8 x 1.25 M Adaptor (Steel) |
| A005 | Reducer, 1/4"F x 1/8" M Adaptor (Brass) |
| Part No. | Description |
|---|---|
| A011 | Socket, 1/4"F x 1/4"F Adaptor (Brass) |
| A012 | Socket, 1/8"F x 1/8"F Adaptor (Brass) |
| Part No. | Description |
| A121 | Pipe,1/4”M x 1/4”M x 50mm (Steel) |
| A122 | Pipe,1/4”M x 1/4”M x 100mm (Steel) |
| A123 | Pipe,1/4”M x 1/4”M x 150mm (Steel) |
| A124 | Pipe,1/4”M x 1/4”M x 200mm (Steel) |
| Part No. | Description |
| A106 | Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel) |
| A107 | Pipe, 1/8"M x 1/8"M x 150mm for divider Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel) |
| A108 | Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel) |
| A109 | Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel) |
| Part No. | Description |
|---|---|
| A023 | 45° Elbow, 1/4”M x 1/4”F Adaptor (Brass) |
| A024 | 45° Elbow, 1/8”M x 1/8”F Adaptor (Brass) |
| Part No. | Description |
|---|---|
| A019 | 90° Elbow, 1/4”F x 1/4”F Adaptor (Brass) |
| A020 | 90° Elbow, 1/8”F x 1/8”F Adaptor (Brass) |
| A021 | 90° Elbow, 1/4”M x 1/4”F Adaptor (Brass) |
| A022 | 90° Elbow, 1/8”M x 1/8”F Adaptor (Brass) |
If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only)
- All Parts should be assembled tightly with PTFE tape.
- For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
- If the bearing lube point is NPT, use the thread converter.
